Products Contact Us Jobs About Arcom Tech Support Applications Events Home

 

EMC for all environments

Arcom have designed and tested the APC Pentium 4 product to meet the worst case conditions for both emissions (EN55022 Class B) and immunity (EN61000-6-2:2001). The product has also been tested emission and immunity compliance with Railway Applications (EN50121-4:2000).

CE
EU 89/336/EEC Electromagnetic Compatibility Directive, as amended by 92/31/EEC and 93/68/EEC
EN 55022:1998 for Information Technology Equipment Optional breakout panel
Optional breakout panel

EMC gasketing
EMC gasketing

Seam welded construction
Seam welded construction

Conducted Emissions:
Radiated Emissions:
EN55022 Class B
EN55022 Class B
EN61000-6-2:2001 for Industrial Environment
Enclosure
Related RF Immunity:
Electrostatic Discharge Immunity:
EN61000-4-3
EN61000-4-2
AC Port
Conducted Immunity, RF common mode:
Fast Burst Transient Immunity:
Surge Immunity:
Voltage Dips and Interruption:
EN61000-4-6
EN61000-4-4
EN61000-4-5
EN61000-4-11
Signal Port
Conducted Immunity, RF common mode:
Fast Burst Transient Immunity:
EN61000-4-6
EN61000-4-4

EU 72/23/EEC Low Voltage Equipment Directive, as amended by 93/68/EEC.

The products comply with the EU Low Voltage Equipment Directive by meeting the following standard - 
BS EN60950 : 1992 Safety of information technology equipment.

Test Configuratons
Hardware
Slot CPU card
2.4GHz Pentium 4 Processor
128MB DDR SDRAM
40GB Seagate HDD
Sony Floppy disk drive
RW CD DVD ROM drive
PCIB40
PCIB40 test box
3 meter 50 way screened cable
quality certification
Software
PCIB4EMC.EXE test program
MS-DOS O/S
A fully detailed independent test report
is available for inspection.
 
FCC Verification: Part 15, Class A
NOTE: This equipment has been tested and found to comply with the limits for a Class A, digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference  in which case the user will be required to correct the interference at his own expense.

Product Range  |  Contact Us  |  Job Vacancies  |  About Arcom  |  Technical Support  |  Applications  |  Events  |  Home

Arcom

  US - Tel: 888-941-2224
  UK - Tel: 0800 411300